Yanhua Mini ACDP Features:

EEPROM Programming:

• Supports in-circuit programming (ICP) and on-adapter board programming (OBP) for 93/24/25/35/95 Series EEPROMs.

BMW Key Programming:

• Supports CAS1-CAS3+ IMMO key programming and mileage reset via OBD mode.
• Supports CAS3+/3++, CAS4/4+ key programming and mileage reset through ICP, with data reading and writing without pin lifting or component removal.
• Enables FEM/BDC IMMO key programming and mileage reset with fully automatic mode matching, ensuring safe and fast operation. Also supports FEM/BDC module restore, backup, and anti-theft data writing simultaneously.
• Features key unlocking and refresh functions.
• Repairs (FRM) Footwell module data without coding.
• Supports BMW 8HP (F/G chassis) and 6HP (F chassis) gearbox refresh and cloning.
• Capable of CAS1-CAS4 data restoration, allowing modifications to vehicle frequency, VIN, ISN code, or CAS module replacement via EE data modification.
• Supports OBD restore for CAS3/CAS3+/CAS3+ issues caused by downgrades.
• Reads ISN codes for N20/N55/N13 via OBD without opening the DME shell, and for MSV70/MSV80/MSD80 without shell opening. Also reads ISN codes for other models (e.g., B38) by shell opening.
• Supports instrument calibration across the BMW full range.

Jaguar/Land Rover KVM Module Programming:

• Adds key and handles all-key-lost scenarios for new Jaguar and Land Rover models with KVM modules from 2015 onwards.

Porsche BCM Module Programming:

• Adds key and manages all-key-lost situations for new Porsche models from 2010 onwards.

Volkswagen MQB Module Programming:

• Supports VW MQB platform for parts of VDO key programming and mileage adjustment via OBD. Also supports Passat MMC (NEC D70F3525+95320) instrument adjustment post-2015 via ICP mode.

Fujitsu CPU Module Programming:

• Supports mileage adjustment for Fujitsu CPU MB91F models (e.g., Honda Fit, KIA K3/K5, Sonata 9, etc.).

Clear EGS ISN:

• For BMW 6HP/8HP gearbox connection, includes functions like EGS state, ISN clearing, adaptation reset, backup coding, and coding recovery.

Volvo ECM Key Programming:

• Adds keys and manages all-keys-lost scenarios for Volvo ECM models from 2009 to 2018.

VW/Audi Gearbox Clone Module:

• Supports VW and Audi models including DQ200 (0AM/0CM), DQ250 (02E/0D9), DL382 (0CK), DL501 (0B5), VL381 (0AW), and others.

Please note:

• Modules 3, 8, 12, 15, 18, 19, 25, and 30 require a different interface board for ACDP 1st generation. If using ACDP 2nd generation, these modules must be purchased separately as they are not compatible with ACDP 2nd generation hardware.
• ACDP 2nd generation uses different PC software; do not use PC software designed for ACDP 1st generation with ACDP 2nd generation.